Instalacija offical ROMa na ZUK Z2

Instalacija offical ROMa na ZUK Z2

PostPostao/la admin » Sri ožu 22, 2017 11:31 am

windows7sevn.org Facebook Share
moderatori degeni su zaključali temu na zukfun.eu
https://zukfans.eu/community/threads/ex ... -rom.5658/

ali mi se na PP javio "dobar insan" koji je napisao sljedeće

Treba ti Pc, komada jedan, sa pendzerima 7, najbolje krekiranim kod Joze.
Kad upalis PC, podrazumijeva se da ima admin. account, I onda lijepo ko covjek, drug I starjesina,
1.) odes na "start" I ukucas cmd
2.) desni klik 'Command Prompt' I pritisni 'Run as Administrator'
3.) U crnom prozorcetu kad ti se e otvori, napisi "bcdedit.exe -set TESTSIGNING ON"
to bi trebalo izgledati nesto poput ovoga:
https://msdn.microsoft.com/en-us/window ... ion-option
moj dodatak, a sa linka gore:
Note After you change the TESTSIGNING boot configuration option, restart the computer for the change to take effect.


Dok ti ne uspije, pokusavaj.
http://www.gizbeat.com/11283/hs-usb-qdl ... h-miflash/

Postoji dvije verzije tog testsigning on upisa, guglaj.Jedna od njih mora raditi.

Kad ti uspije sve sa testsigning on, pokreni ponovo racunalo i onda prijedi na sljedeci korak, a to je

4.) download potrebnih fajlova (QDloader 9008 MiFlash tool and Qualcomm drivers, Zuk Z2 drivers , adb, and fastboot command sets)
moj dodatak:sve to download-ati sa ovog linka


informacije o indijskom ROM-u ZUI 2.0.093ST QPST mozes naci ovdje
https://zukfans.eu/community/threads/cm ... -only.291/
Kad skines rom, odmah ga odzipaj. Najbolje da imas sve to na desktopu.


miflash skini
http://www.mediafire.com/file/77muzrw69 ... r-pack.zip


Aktiviranje opcije USB debugging na telefonu

Ako si sve ovo do sada savladao, bravo!! Ostaje da aktiviras ovu opciju, I neces vjerovati, lahko je! Sve sto trebas da uradis je sljedece:

Settings >> About phone >> Tap “Build Number” or “Zuk Version” 7x ili dok ti ne kaze da si developer
vrati se nazad u glavni meni za postavke
pritisni ‘Advanced’
pronadji ‘Developer Options’
aktiviraj ‘USB debugging’
aktiviraj ‘USB 2.0’

Nakon sto ti ovo uspije, pozovi sve da ti cestitaju, zavrsio si pola posla!
Sljedeci korak je instalacija svih preuzetih fajlova (mislim na ove QDloader 9008 MiFlash tool and Qualcomm drivers, Zuk Z2 drivers , adb, and fastboot command sets) onako kako je objasnjeno u videu.
Po zavrsenoj instalaciji svih potrebnih fajlova koje si skinuo, pokreces ono

7.) c:/adb
tu ti je glavni stos da kliknes na bijeli dio u folderu , desni klik I selektiras ‘Open command window here’
obavezno tako uradi, a posto je to rijecima tesko opisati, imas mislim u video taj dio, pa ga pogledaj onoliko puta dok ti ne bude jasno sta moras uradit.

moj dodatak
valjda se ovo može pokrenuti i na start dugme windowsa, pa "search" i ukucat "cmd"
pa onda desni klik na cmd i "run as administrator"
dobije se prozor sa cmd komandnom linijom u kojoj je potrebno ukucati path za folder u kojem je adb
"cd c:\adb_foosboot" (path na folder u kojem je adb & fastboot)


Z2 ti mora bit spojen, I nece mu biti nista, prati notifikacije kakve dolaze na njemu. moras odobrit sve dozvole kad te telefon pita za Debugging Permission Requests (obicno to dolazi nakon aktivacije usb 2.0 po tackom 6.)
Mozda ces ga morati spajati na usb kabal par puta dok ne vidis obavijest i par puta vrati se na tacku 6 pa je aktiviraj i dekativiraj, sve dok te telefon ne pita za Debugging Permission Requests.

8.) u cmd napisi adb devices
kad to napises , pokazace ti se serijski broj uredjaja ili tako nesto, ako ti ne napise serijski broj (nesto tipa 35e3e5 device) onda idi po tackama 9,10,11. Ak ti je odmah izlistao, prijedji na tacku broj 12 (preskoci 9,10,11)
9.) ak ti se nista ne ispise, moras napisati adb kill-server
10.) zatim napisi adb start-server
Cijelo to vrijeme gledaj sta ti telefon javlja i dopusti sve sta te trazi.
11.) ukucaj ponovo adb devices i sad bi trebalo biti uspjesno

Dok ti ovo ne uspije, ne prelazi na sljedece tacke.
12.)ukucaj komandu adb reboot edl
ovo je tacka gdje si vec poslao svoj telefon u vjecna lovista Postao ti je crn, i presao u Emergency DownLoad mode

Sada pokreces miflash
13.) pokreni miflash i pod browse otidji do indijskom roma (kojeg si prethodno odzipao) i selektiraj ga.
14.) idalje si u miflash programu pa prtisni f5 ili opcoji refresh i morao bi vidjeti da pise (ispod device) COM 5 ili com 3 ili tako nesto, to je tvoj uredjaj. Obicno se sve to odvija automatski, tako da cak nema ni potrebe za ovom tackom.
15.) tu ce ti pisati opcije flash, pa ti klikni i izaberi Flash all except storage
16.) pricekaj minut -dva, i obicno ce ona linija od kocika biti zelena i pisati da si uspjesno flesao svoj zuk z2 , pod operation completed successfully

odspoji svoj telefon, pritisni dugme za paljenje i drzi ga prtisnutog dok se mrcina ne pokrene (treba oko minute).
Cestitam, uspjesno si flesao cigu iz kine i naucio ga indijski :)
uradi potom OTA update, otidji u poruke ikao da ces nekome pisati sms i nadji one jebene tri tacke u gornjem desnom kutu, klikni na njih i tamo su ti opcije za iskljucivanje notifikacija.

Valjda nisam sta zaboravio, imas video dole.




moj dodatak uz tačku 4)


link za skidanje ROM-ova
https://www.androidfilehost.com/?w=file ... t_dir=DESC

direktan link za download posljednje verzije ROM-a 2.5.334
http://cdn.zui.lenovomm.com/download/17 ... 16_qpst.7z
ne zna primitivizam šta je minimalizam

Slika
Avatar korisnika
admin
Site Admin
 
Postovi: 5157
Pridružen: Sub pro 29, 2012 2:09 pm
Lokacija: Tuzla, Bosna

Re: Instalacija offical ROMa na ZUK Z2

PostPostao/la admin » Sri ožu 22, 2017 11:39 am

javio se još jedan drugar sa tog foruma
ovo je procedura za flešanje NEoficijelnih ROMova



Vidim zakljucali su ti temu, pa ti ovde saljem. Ajde prvo ovo sve sa snimka uradi, sve redom kako je i ovaj lik. Dao je linkove i detaljna uputstva, korak po korak.
Poslije toga romove je lako vrtiti, otkucam ti u par redova kad ovo rijesis.
Bitno ti je za pocetak otkljucavanje bootloadera i stavljanje custom recoveryja, u ovom slucaju twrp.
Neces nista sjebati ako pratis tacno sve redom.
Polako samo, poslije se osladi pa oces sve romove redom probati. Svi su bolji od fabrickog, vjeruj mi :)
Ajde pa sretno
ne zna primitivizam šta je minimalizam

Slika
Avatar korisnika
admin
Site Admin
 
Postovi: 5157
Pridružen: Sub pro 29, 2012 2:09 pm
Lokacija: Tuzla, Bosna

Re: Instalacija offical ROMa na ZUK Z2

PostPostao/la admin » Sri ožu 22, 2017 2:42 pm

HS-USB QDloader 9008 How to unbrick and flash your Zuk Z2 and any Qualcomm phone with MiFlash
http://www.gizbeat.com/11283/hs-usb-qdl ... h-miflash/

This guide will work for all Qualcomm phones, but you must have the appropriate ROM for your phone.
In this guide, we will be linking to the Zuk Z2 Plus, also known as Zuk Z2, Zuk Z2 2131, or Zuk Z2 2132 Indian, and Zuk Z2 Pro ROM.
Whether you’re here for unbricking your Zuk Z2 Plus, or Zuk Z2 Pro, or you want to come off of the Zuk Z2 shop ROM, this is the guide you need.

NOTE: This flashing method may erase all data on your phone. Backup any important pictures, documents, and files to your PC, the cloud, or another phone before flashing.

.mbn vs .elf

In the past, Qualcomm ROMs came with a “prog_emmc_firehose_8994_ddr.mbn” or “prog_emmc_firehose_8994_lite.mbn”. The important thing being the “.mbn” extension, which may confuse people a bit, as the newer Snapdragon 820 ROMs often have “prog_emmc_firehose_8996_ddr.elf”, or “prog_emmc_firehose_8996_lite.elf”.

This could throw you off if you’re using the official Qualcomm flash utility, as it won’t see the “.elf” file because it’s looking specifically for “.mbn”. This is one of the reasons we are using the Xiaomi MiFlash, as it automatically finds and configures the flash for you.

1. HS-USB QDloader 9008 driver download and Zuk Z2 ROM download

1. The first thing we need to flash or unbrick our Zuk Z2 with the stock factory ROM are the appropriate drivers.
These drivers will auto-install. You simply extract, double-click and follow the prompts.
download link for Zuk Z2 Plus / Zuk Z2 Pro flash tool and drivers
2. This ROM is the latest ROM as of the publishing of this article. Zuk Z2 ROM version 2.3.042. This ROM is OTA updateable. It means that after flashing you can OTA update Zuk Z2 in the future without PC flashing.
link for download indian stable ROM click

2. Setting your PC to test mode
Generally on 64bit Windows, installing drivers may require your PC to be in test mode. If you attempt to install a driver, and see any notifications from your PC indicating the drivers can’t be installed, you need to boot your PC in test mode.

1.Logon to Windows with an admin / administrator account
2.Open the Windows Start menu and type “cmd”
3.RIGHT-CLICK on ‘Command Prompt’
4.Select ‘Run as administrator’
5.In the black window that opens, type “bcdedit.exe -set TESTSIGNING ON”
6.Reboot your PC
Slika

3. Install the drivers and tools

Note, during the install of these drivers, you may see User Account Control (UAC) permission requests or notifications alerting you that the drivers are unsigned. Make sure to allow all of these permission requests, or the drivers will not properly install.

1. QDloader 9008 MiFlash tool and Qualcomm drivers — This is the tool and the required drivers for the Qualcomm MiFlash utility to communicate with the mobile via USB for flashing. DOUBLE-CLICK the extracted MiFlash from the above download and follow the prompts.
Image

2. Zuk Z2 drivers — These are the official Zuk Z2 drivers. They may not be needed. However, it can’t hurt to have them installed. DOUBLE-CLICK the extracted Zuk Z2 drivers and follow the prompts.
Image

3. adb, and fastboot command sets — These are the tools and drivers which will allow you to reboot your Zuk Z2 to a mode that will allow flashing from the PC. DOUBLE-CLICK the extracted adb driver auto-installer and type “Y” at all three prompts.
Image
ne zna primitivizam šta je minimalizam

Slika
Avatar korisnika
admin
Site Admin
 
Postovi: 5157
Pridružen: Sub pro 29, 2012 2:09 pm
Lokacija: Tuzla, Bosna

Re: Instalacija offical ROMa na ZUK Z2

PostPostao/la admin » Sri ožu 22, 2017 2:57 pm

3. Turn on Zuk Z2 USB debugging

This process is what will allow your PC to communicate with your phone so that you can give it the command to boot into a mode that will allow it to be flashed.

1.Go to Settings >> About phone >> Tap “Build Number” or “Zuk Version” 7x or until it tells you you’re a developer
2. Hit the back button
3.Go to ‘Advanced’
4.Scroll to and tap ‘Developer Options’
5.Toggle on ‘USB debugging’
6.Toggle on ‘USB 2.0’ if you see the option there

4. Boot your Qualcomm mobile to edl mode

In this step, we put the phone in a mode where it can communicate with MiFlash and properly flash the ROM.

In step 4.3 we installed the adb and fastboot command sets. When we did this, a folder called ‘adb’ was created in your system drive. Typically this is the ‘c:’ drive.
xa.png

Image

Flash Zuk Z2 ROM using MiFlash QDloader 9008 PC flash tool

In the previous step, we installed the MiFlash Tool. Start it up by going to Windows Start menu search and typing “MiFlash”, then select it and wait for it to open. You should see a window that looks similar to one of the two below, depending on which version of MiFlash you are using.

If you can’t locate MiFlash from the Windows Start menu or from the shortcut on the desktop, navigate to ‘C:\Program Files\Xiaomi\MiPhone’ or at ‘C:\XiaoMi\XiaoMiFlash’, and DOUBLE-CLICK ‘MiFlash’ or ‘XiaoMiFlash’.


1.In the MiFlash window, click ‘Browse’ and direct MiFlash to your already extracted Zuk Z2 ROM from step 1.2 / 1.3
2.In the MiFlash window, click ‘Refresh’, or hit F5. After a couple of seconds you should see a blank progress bar and ‘COM#’, which designates the COM port your Zuk Z2 has been connected to.
3.In the bottom of MiFlash you will see several options. Normally we select ‘Flash all except storage’, but you are free to use any of them. Note, that just because you select ‘Flash all except storage’ or ‘Flash all except storage and data’, does not mean this data will be saved. It will depend on the script prepared by the ROM engineers for this particular ROM.
4. Now is the moment of truth, go ahead and click ‘Flash’ and the flash should begin. Typically a flash will take about 3-4 minutes.

Image

Start your phone

1. After the flash is complete, disconnect the Zuk Z2 from your PC
2. Hold the Power Button for about 10 seconds and your Zuk Z2 should then start.

We strive to provide accurate and helpful guides and reviews. In the comments below, let us know your successes, failures, and any information you would like to add to help make this guide more useful for future users.
ne zna primitivizam šta je minimalizam

Slika
Avatar korisnika
admin
Site Admin
 
Postovi: 5157
Pridružen: Sub pro 29, 2012 2:09 pm
Lokacija: Tuzla, Bosna

Re: Instalacija offical ROMa na ZUK Z2

PostPostao/la admin » Sri ožu 22, 2017 5:07 pm

Treba ti Pc, komada jedan, sa pendzerima 7, najbolje krekiranim kod Joze.
Kad upalis PC, podrazumijeva se da ima admin. account, I onda lijepo ko covjek, drug I starjesina,
1.) odes na "start" I ukucas cmd
2.) desni klik 'Command Prompt' I pritisni 'Run as Administrator'
3.) U crnom prozorcetu kad ti se e otvori, napisi "bcdedit.exe -set TESTSIGNING ON"
to bi trebalo izgledati nesto poput ovoga:
https://msdn.microsoft.com/en-us/window ... ion-option
moj dodatak, a sa linka gore:
Note After you change the TESTSIGNING boot configuration option, restart the computer for the change to take effect.




taj korak na laptopu koji je na W7
odradio
"the operation completed successfully"

Image
Prilog
x.png
ne zna primitivizam šta je minimalizam

Slika
Avatar korisnika
admin
Site Admin
 
Postovi: 5157
Pridružen: Sub pro 29, 2012 2:09 pm
Lokacija: Tuzla, Bosna

Sljedeće

Vrati se na: Mobiteli

Tko je online

Nema registriranih korisnika pregledava forum i 1 gost